slide2
slide3
slide4
slide5
slide6
  • Product description
  • Technical datas
  • Optional

Notching saws KSSP250E, KSSPM250N, KSSP250N-AV

✛ Version with guide carriage on hardened and ground shafts
✛ Stepless height adjustment of the table surface
✛ Electric and pneumatic control

The notching saw KSS is available in different versions:

manual M or pneumatic P with simple electr. Version E or normal version N

Guide carriage on hardened and ground shafts in linear ball guide bushes. 2 motors attached at an angle of 45°. The arrangement of the saw blades guarantees the best saw cuts. Stepless height adjustment of the table surface. 2 clamping cylinders per profile for profile fixation. Electrical and pneumatic control designed according to German standards and safety.

Notch saw for 45° cuts, Cutting height max. 63mm, adjustable according to the scale. 2 pneumatic clamps with foot valve, available in the following versions:


Art.-Nr Type Description
4781 KSSM250E Manual version with control "E": electrical version motor protection switch with emergency stop.
4606 KSSM250N Manual version with "N" control: electrical version motor switch on/off, with emergency stop.
4782 KSSP250E Pneumatic version with control "E": electrical version motor protection switch with emergency stop.
4930 KSSP250N Pneumatic version with "N" control: electrical version motor switch on/off, with emergency stop.
4783 KSSP250N-AV Automatic version with "N-AV" control: electrical version, motor switch on/off, with emergency stop.
Art.-Nr. Type Air pressure Motor Saw blade diameter Connection
4781 KSSM250E 6-8 Bar 2 x 0.75 kW D=250mm, d=32mm, 2x 230/400V-50Hz
4606 KSSM250N 6-8 Bar 2 x 0.75 kW D=250mm, d=32mm, 2x 230/400V-50Hz
4782 KSSP250E 6-8 Bar 2 x 0.75 kW D=250mm, d=32mm, 2x 230/400V-50Hz
4930 KSSP250N 6-8 Bar 2 x 0.75 kW D=250mm, d=32mm, 2x 230/400V-50Hz
4783 KSSP250N-AV 6-8 Bar 2 x 0.75 kW D=250mm, d=32mm, 2x 230/400V-50Hz
 
Art.-Nr. Type Length Width Height Weight
4781 KSSM250E L = 1050 mm B = 680 mm H = 1150 mm 124kg
4606 KSSM250N L = 1050 mm B = 680 mm H = 1150 mm 125kg
4782 KSSP250E L = 1050 mm B = 680 mm H = 1150 mm 132kg
4930 KSSP250N L = 1050 mm B = 680 mm H = 1150 mm 134kg
4783 KSSP250N-AV L = 1050 mm B = 680 mm H = 1150 mm 135kg

Optional accessories:

  • Saw blade HM Ø250x32 (2x)
  • Suction socket Ø80mm above & Ø100mm below
  • Suction socket reduction Ø80/100mm
  • Extraction system (ASA 2053)
  • Counter profile support standard / as required
  • Hydropneumatic saw feed

Art.-Nr Type Description
4158 HSS 250x2,0x32Z Saw blade HSS 250x2,0x32 Z160
4342 HSS 250x2,0x32Z Saw blade HSS 250x2,0x32 Z200
4367 HM 250x3,2x32ne Saw blade HM 250x3,2x32 Z 96TFneg Combi
1126 SZH24 Clamping cylinder D=40x140mm double-acting with holder for C-rail 28x16mm 2 throttle check valves with 1.5m pneumatic hose 6/4.
4862 KSE-BS/1 Cooling spray device for machines, with spray nozzle, hose 293mm long and 5 liter plastic container.
4110 Kühlmittel-A/S Coolant concentrate 5 liters. Canister for aluminium/steel.
5293 GLSM200-HBP Pneumatic lever brake for all manual glazing bead/notch saws.
6292 GLSP200N-AHPV44 Glazing bead saw surcharge for hydropneumatic feed for sawing aluminum glazing bead profiles, stroke length 440mm, feed adjustable via scaling.
5264 GLSM/P-ASSO-080 Suction socket OD= 80mm above for glass bead saw, with Plexiglas viewing window.
6076 GLSM/P-ASSU-100 Suction socket OD=100mm, at the bottom of the chip chute from the glazing bead saw.
6627 FSAB-2053/400V Extraction 1.10kW, 400V, 50Hz, with filter bag and chip bag, air capacity freely sucking 2464m³/h, pressure difference max. 1250PA, filter surface 1.8m², G1, connection 1x100mm, 1x120mm incl. filter bag, 2.5m hose D=100mm, 3 Chip bags 160 ltr.
6628 FSAB-2553/400V Extraction 1.50kW, 400V, 50Hz, with filter bag and chip bag, air capacity freely sucking 3273m³/h, pressure difference max. 2000PA, filter surface 3.6m², G1, volume of chip bags 2x160ltr. Connection 1x100mm, 2x120mm, 2.5m hose Ø100mm, 4 chip bags.
2416 RED-ASS-100/075 Reduction 100/ 75mm for suction hose 100mm. Including sealing ring.
3060 SZZ-LA/MA Piece counter on the machine, in connection with a length stop.
5821 SP-PE/W Safety package PE converter for clamping cylinders in connection with electronic length stop.

Your contact person
Patrick Rygiel
Management
p.rygiel@ryko.de
Tel: (+49) 0 72 32 / 30 18-10
Mobil: (+49) 0 171 / 68 28 933
Product request


    *Required fields